•【Upgrade Daylight / Night Mode】Slide the switch to turn on / off the photoelectric sensor. In “DAYLIGHT” mode, the light can be activated during the day and night. In “NIGHT” mode, the light can only be activated at night.

•【Motion Sensing Lights】Built-in PIR infrared motion detector, the max detection distance can reach 20 feet and the max detection angle can reach 120 degrees in the dark. The light will be activated immediately when motion is detected within this range, and automatically turn off if no motion is detected after 25 seconds, to save battery lifespan.

•【High-Quality Lamp Beads】Built-in High-quality Ultra-bright SMD2835 LED lamp beads, which diffuse well in all directions with 90LM/W brightness.

•【Easy to Install】Easy installation . And it can be widely used in bathrooms, basements, garages, hallways, stairs, warehouses, utility rooms, sheds and other places where wiring is not convenient.

•【SAVE ENERGY】Bringing cost efficient lighting which will bring you clarity of mind without having to worry about the cost of your next electric bill. Each light only uses 12 watts of power and turn on instantly when you are in the detection area. This means you can expect to reduce your monthly electricity bill since these lights are only in use when you are nearby.

•Technical specifications:

-Voltage: AC170~265V/85~265V 

-Lifetime: 35000hrs 

-Material: Iron+PC

-CRI: >70 

-Detection Distance: max.6m(<24°)

-Time Delay: 10sec±3sec to 3min±30sec(adjustable)

-Ambient Light:<3-2000LUX

-Detection Range: 360°

-Color temperature: 3000K/4000K/6500K

-IP Rating: IP20